Fix My Grill Parts finder · repair notes

fix

Gas grill regulator reset (low flame after a tank change)

The excess-flow valve chokes the hose when you open the tank fast or leave a knob on. A model-agnostic reset, leak check, and when the regulator is actually failed.

easy PT20M Updated 2026-08-30

Search this job (no invented ASINs): BBQGuys · Amazon

LP tank, regulator, and hose Propane tank, QCC1 handwheel, regulator body with excess-flow device, hose to the manifold. LP TRAIN · TANK → VALVES 1 LP tank 2 QCC1 handwheel 3 regulator excess-flow inside 4 hose 5 manifold / valves Open the tank slowly, knobs off. Fast-open trips the excess-flow → tiny flames.
Fig. — LP tank, QCC1 coupling, regulator, hose to the valves.

Every LP grill has an excess-flow limiter in the regulator. A sudden rush of gas — tank spun open, or a knob already on — seats it to a trickle. The trickle looks like dead burners. The reset is free and should be first whenever all burners are weak after a tank event.

Brand-specific notes: Weber Spirit. This page is the generic sequence for Char-Broil, Nexgrill, Broil King, Napoleon, and any QCC1 handwheel.

Safety

Reset

  1. All knobs OFF, including side burners and infrared sears. Feel each knob.
  2. Shut the tank valve fully.
  3. Unscrew the QCC1 coupling from the tank. A short hiss of trapped pressure is normal. A continuous hiss is not — stop.
  4. Wait 30–60 seconds so the excess-flow seat can relax.
  5. Thread the coupling on straight, hand-tight, until it stops. Tools often damage the collar.
  6. Open the tank slowly. A quarter turn over several seconds, then fully open. Fast-open retrips the seat.
  7. Wet the joint with soapy water. Growing bubbles are a leak. Shut the tank. Reseat or try another tank. Do not light a leaking joint.
  8. Lid open. Light one burner first, high. Wait 30–60 seconds to fill the hose. Then open the others. You want full-length flames, mostly blue.

Still weak?

What a reset will not fix

Habits that prevent the ticket